ASD Winter Flash Sale After Party Additional 10% Off. Code: AFTERPARTY

Let the After Party Begin

00 Days
00 Hrs
00 Mins
00 Secs
Shop Now

Reef Spec Carbon (100g)

Description

Why Use Carbon?

Carbon is an essential component in aquarium filtration, renowned for its ability to trap and remove organic compounds that can cause water discoloration and foul odors. In a marine environment, where organic waste is continuously produced by aquarium inhabitants, the use of high-quality carbon is crucial for maintaining optimal water conditions and supporting a healthy aquatic ecosystem.

Media Bag or Reactor?

For maximum efficiency and performance, we recommend utilizing RedSea's Reef Spec Carbon in an up-flow style reactor. This configuration ensures consistent contact time and optimal utilization of the carbon's absorption capabilities. While filter or media bags can also be used, they may not provide the same level of efficiency and may require more frequent replacement to maintain water clarity.

Usage Guide:

  • Organic Load and Yellow Tint Removal: Add approximately 50g (100ml) of Reef Spec Carbon per 200L (50 gallons) of water for 1-2 months in a moderately stocked reef aquarium to effectively remove organic pollutants and eliminate yellow tint.
  • Post-Medication Treatment: Use 100g (200ml) of Reef Spec Carbon per 200L (50 gallons) of water for one week to absorb medication residuals and ensure water purity after treatment.
  • Ozone Post-Treatment: Employ 50g of Reef Spec Carbon per 50mg/hr of ozone injection to remove residual ozone. Place the carbon at the ozone reactor/protein skimmer outlet and replace it once it reaches approximately 50% of its original volume.

Tips for Optimal Performance:

  • Rinse any fines under tap water until it runs clear.
  • Ensure a recommended flow rate of 250 - 400 GPH per 50g of Reef Spec Carbon to maximize absorption efficiency.
  • Replace the carbon every 1.5 - 2 months to maintain peak performance and water clarity.

Reef Spec Carbon Specifications:

  • Shape: 0.6 - 2.3 mm flake
  • Density: 0.48 g/ml
  • Pore Volume (PV): 1.04 ml/g
  • Total Surface Area (TSA): 1000 m²/g
  • TSA/PV Ratio: 990 m²/ml
  • Small Organic Adsorption: 1000mg/g
  • Large Organic Adsorption: 280 mg/g
  • pH in Distilled Water: >8
  • Phosphate Output: 0.000001 g/ml
  • Includes Filter Bag

Elevate your aquarium filtration and maintain pristine water conditions with Red Sea Reef Spec Carbon, the ultimate choice for discerning marine and reef enthusiasts.

Product form

Why Use Carbon? Carbon is an essential component in aquarium filtration, renowned for its ability to trap and remove organic... Read more

2 in stock

$10.99 Excl. VAT

    Description

    Why Use Carbon?

    Carbon is an essential component in aquarium filtration, renowned for its ability to trap and remove organic compounds that can cause water discoloration and foul odors. In a marine environment, where organic waste is continuously produced by aquarium inhabitants, the use of high-quality carbon is crucial for maintaining optimal water conditions and supporting a healthy aquatic ecosystem.

    Media Bag or Reactor?

    For maximum efficiency and performance, we recommend utilizing RedSea's Reef Spec Carbon in an up-flow style reactor. This configuration ensures consistent contact time and optimal utilization of the carbon's absorption capabilities. While filter or media bags can also be used, they may not provide the same level of efficiency and may require more frequent replacement to maintain water clarity.

    Usage Guide:

    • Organic Load and Yellow Tint Removal: Add approximately 50g (100ml) of Reef Spec Carbon per 200L (50 gallons) of water for 1-2 months in a moderately stocked reef aquarium to effectively remove organic pollutants and eliminate yellow tint.
    • Post-Medication Treatment: Use 100g (200ml) of Reef Spec Carbon per 200L (50 gallons) of water for one week to absorb medication residuals and ensure water purity after treatment.
    • Ozone Post-Treatment: Employ 50g of Reef Spec Carbon per 50mg/hr of ozone injection to remove residual ozone. Place the carbon at the ozone reactor/protein skimmer outlet and replace it once it reaches approximately 50% of its original volume.

    Tips for Optimal Performance:

    • Rinse any fines under tap water until it runs clear.
    • Ensure a recommended flow rate of 250 - 400 GPH per 50g of Reef Spec Carbon to maximize absorption efficiency.
    • Replace the carbon every 1.5 - 2 months to maintain peak performance and water clarity.

    Reef Spec Carbon Specifications:

    • Shape: 0.6 - 2.3 mm flake
    • Density: 0.48 g/ml
    • Pore Volume (PV): 1.04 ml/g
    • Total Surface Area (TSA): 1000 m²/g
    • TSA/PV Ratio: 990 m²/ml
    • Small Organic Adsorption: 1000mg/g
    • Large Organic Adsorption: 280 mg/g
    • pH in Distilled Water: >8
    • Phosphate Output: 0.000001 g/ml
    • Includes Filter Bag

    Elevate your aquarium filtration and maintain pristine water conditions with Red Sea Reef Spec Carbon, the ultimate choice for discerning marine and reef enthusiasts.

    Recently viewed products

    © 2025 Aqua SD, Powered by Shopify

      • Amazon
      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • USDC
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      ×

      Please wait...

      Make An Offer

      Descriptive image text
      Descriptive image text