New Arrivals

Aids in Regeneration of Cut Coral Tissue and Recovery of Live Coral Frags Over the past several decades, there has been a tremendous increase in reports of coral disease affecting wild reefs. These same coral diseases can also have a negative impact on the home reef aquarium systems and the corals that are kept. Coral diseases can rapidly lead to significant losses of coral specimens in the reef aquarium. These diseases can affect a wide range of corals including Small polyp stony corals (SPS), Large polyp stony corals (LPS) along with soft coral. Less than optimal water quality, poor lighting, coral warfare, along with tissue damage due to handling and/or injury occurring in the aquarium can lead to sudden outbreaks of coral disease. These diseases may have a sudden impact, with specimen loss almost overnight, or may slowly progress over time. Ultimately, the presence of a coral disease in the reef aquarium will lead to coral specimen loss. It is vital that disease identification takes place, treatment implemented, and the root cause of the outbreak eliminated to prevent additional infections and spreading to other coral specimens within the aquarium. All-Natural, herbal frag dip to accelerate coral recovery and growth after fragging It helps prevent disease transfer into the aquarium Reduces coral stress following fragging Stimulates regrowth of coral tissue that is needed due to fragment cutting Safe for all coral varieties, soft, LPS and SPS Effective prophylactic treatment prior to adding frags into the aquarium Brightwell Aquatics Frag Recover is an All-Natural, coral dip that will not only treat the affected coral but will help stimulate regrowth of lost coral tissue caused by the disease infection. Instructions & Guidelines Shake product well before using. To prepare the Frag Recover coral frag dip solution, add 20 mL (4 capfuls ) of Frag Recover to 1/2 gallon (1.9 L) of aquarium water. Stir the solution to evenly disperse the product. Make enough solution to cover corals. After the selected coral has been cut, place the fragged piece along with the parent colony into the prepared Frag Recover frag dip solution for 5 minutes (use a timer). It is recommended that the solution is gently forced over the cut areas by (gently) squirting prepared solution with a turkey baster over the targeted areas. After the dip has completed, place the parent colony back into the aquarium. The new coral frag should now be glued or bonded to a solid surface to maximize grow out potential and prevent turning over. Attach the new coral frag to Brightwell Aquatics HexiDiscs (ideal surface area for frag growth) using a reef-safe glue or epoxy as directed. The new coral frag can now be added to the grow-out system (assuming like conditions of the main aquarium) or the main aquarium itself. It will be common for both parent colony and the new coral frag to exhibit diminished polyp extension until they are re-adjusted to the aquarium. To prevent an outbreak of coral disease in the aquarium after fragmentation or treat any visible coral infections in the aquarium, also use Brightwell Aquatics Koral Recover directly in the aquarium as directed. (Because Frag Recover is only designed to be used as a dip outside the aquarium). Caution - Prior to fragging, research the proper fragmentation procedures for the specific coral specimens to be cut, to insure optimal success and overall safety. Wear eye goggles, and rubber gloves because some marine invertebrates can squirt toxic bodily fluids into your face when cut. The fragmentation of corals has become a common practice within the hobby of marine reef keeping. Fragging, as it is commonly called, is simply cutting off a small portion of a parent coral colony and creating additional specimens – frags. This practice allows reef hobbyists to attain desirable coral specimens at a fraction of the cost or to share with other hobbyists while reducing impact on natural reef systems. Fragmenting corals is generally a safe process for the corals but still creates some level of stress on both the parent colony and the newly fragmented piece. The exposed areas, at the cutting site, are more susceptible to infections and overall stress. Regrowth of coral tissue over the newly exposed area is key to the coral frag recovery. Brightwell Aquatics Frag Recover will support the recovery process by aiding in the regrowth of tissue over the exposed, cut areas on both the parent colony and the frag. This will also limit exposure to infection and/or infestation by coral predators and make the fragging process more successful.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Complex system of non-pathogenic aerobic and anaerobic microbes, as well as natural enzymes, specifically formulated to establish biological filtration in new aquarium set-ups, and to enhance the rate of nitrification, denitrification, and organic waste degradation in marine and freshwater aquaria through complete nutrient remineralization.Supplied in a state of suspended animation for maximum longevity.Formulated utilizing extensive data compiled by microbiologists. Benefits Rapid reduction of organic carbon, ammonia, nitrite, nitrate, and phosphate. Digestion of uneaten/undigested food, excreta, detritus, and other latent organic material, resulting in cleaner and healthier aquarium substrate Reduction of organic compounds into nutrients that encourage the growth of photosynthetic organisms Greatly-reduced hydrogen sulfide production. Increase in dissolved oxygen concentration. Limits availability of pre-existing phosphate to undesirable forms of algae and cyanobacteria. Increased water clarity. Instructions and GuidelinesShake product well before using. Mix appropriate volume of MicrōBacter7 (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense MicrōBacter7 below water level of container or aquarium, be sure to thoroughly clean pipette with fresh water prior to placing tube back into MicrōBacter7 bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system (if applicable). Do not add to pump intake port(s). For best results, use within 1-year of purchase date. Grossly overdosing MicrōBacter7 will not significantly increase the effectiveness of the product, nor the rate at which it enacts changes in aquaria. The following recommendations are based upon extensive testing and will produce the best results in most aquaria.Medium- to High-nutrient Systems, or to seed Biological Filtration in new aquaria: To effectively decrease the concentration of available nutrients and waste material in all marine and freshwater aquaria, add 5 ml (1 capful) per 25 US-gallons (94.6 L) [≈4 drops per gallon (3.8 L)] of aquarium water daily for the first two weeks of use; the impact that MicrōBacter7 has on an aquarium is most evident within this period. Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. A noticeable difference in water clarity is typically apparent within 30-minutes of dosing. Follow same instructions for new aquarium start-up. Thereafter, switch to “low-nutrient” dosage (below).Stable, Low-nutrient Systems:To maintain a low concentration of available nutrients in all marine and freshwater aquaria, 5 ml (1 capful) of MicrōBacter7 per 50 US-gallons (189.3 L) [≈2 drops per gallon (3.8 L)] of aquarium water no more than once each week; alternately, add 1 drop per 50 US-gallons daily (or 1 drop per 25 US-gallons every other day). Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. Dosage may be adjusted according to perceived benefit to aquarium, however it is recommended that the dosage not exceed 1 drop per 10 US-gallons per day. With time, hobbyists may determine that decreasing the dosage and/or dosing frequency by up to 50% sufficiently maintains a low-nutrient environment. During changes in biological filtration or when increasing the aquarium bioload, dose 1 drop per 25 US-gallons daily for one week, then resume “low-nutrient” dosage.CautionKeep out of reach of children. Not for human consumption.IngredientsPurified water, proprietary blend of natural enzymes and non-pathogenic, beneficial microorganisms.Technical BackgroundThe concentration of dissolved and particulate organic materials in any aquatic environment can have a significant impact on the overall appearance of, as well as the health of organisms residing within, that system. Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of microalgae and cyanobacteria; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants.Brightwell Aquatics MicrōBacter7 is a selective complex of extremely effective microbes and enzymes that rapidly reduces the concentrations of organic nitrogen, ammonia, nitrite, nitrate, phosphate, and organic carbon in all marine and freshwater ecosystems, leading to greatly improved water quality; better water quality typically leads to healthier aquarium inhabitants. MicrōBacter7 does not require refrigeration, however storage in a cool, shaded area will prolong the activity, and maximize the shelf-life, of the product.MicrōBacter7 does not require refrigeration, however storage in a cool, shaded area will prolong the activity of the vitamins. Refrigeration will maximize the shelf-life of the product.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Overview Highly-concentrated ionic magnesium solution. Provides magnesium, which helps regulate the balance between calcium and carbonates in aquarium water. Stronger than most competing products. Contains no unwanted organic material such as EDTA, gluconate, or polygluconate. Instructions and GuidelinesBasic: Shake product well before using. Add 5 ml (1 capful) of product per 20 US-gallons of aquarium water every other day or as needed to maintain the magnesium concentration within a range of 1,290 - 1,320 ppm. When used in this fashion, 250 ml treats up to 1,000 US-gallons (3,785 L).Advanced: Determine the magnesium concentration in the aquarium using an accurate test kit before supplementing. Shake this product well before using. Each ml of Magnesion will increase the concentration of magnesium (“[Mg2+]”) in 1 US-gallon (3.785 L) of water by 26 ppm. If the initial [Mg2+] in the aquarium is below 1,288 ppm, add this product at the maximum rate of 10 ml per 20 US-gallons daily until the desired concentration is attained, then dose daily or weekly as needed (see below). Always try to maintain the [Mg2+] within a range of +/-10 ppm. To determine the dosing rate of this product once the desired [Mg2+] has been acquired, measure the daily rate of magnesium uptake (i.e. the decrease in magnesium) in your aquarium by measuring the aquarium's [Mg2+] at the same time each day over a one- to two-week period. To determine the daily dosing rate (preferable to weekly dosing) for magnesium maintenance: estimate the volume of water in the entire aquarium system; divide the daily decrease in [Mg2+] by 26; multiply this number by the volume of water in the system to get the daily dosage required (ml) to maintain a stable [Mg2+]. Daily dosing maintains a more stable [Mg2+] (and more natural environment) than dosing weekly, in which the [Mg2+] spikes just after dosing and then gradually decreases throughout the course of the week. Caution: Keep out of reach of children. Not for human consumption. Guaranteed AnalysisMagnesium (min) 2,959 mg/oz. (100,000 ppm) IngredientsPurified water, Magnesium sulfate, Magnesium chlorideTechnical BackgroundMagnesium plays a vital role in reef aquaria: it helps maintain calcium and carbonate (composing the majority of measurable alkalinity) concentrations by limiting unwanted inorganic precipitation with each other. In the absence of adequate magnesium ions, calcium and carbonate ions bond rapidly, depleting their concentrations in the system and creating the false impression that heavier supplementation is required to re-establish the desired concentrations. No matter how much calcium is added, its natural seawater concentration of 412 ppm will never be sustained until the magnesium concentration begins to approach 1,290 ppm. Once the balance between calcium and magnesium has been established, subsequent calcium supplementation yields immediate positive results. Keeping magnesium within a range of 1,290-1,320 ppm will maintain the desired balance, and provides enough of the element to reef-building organisms for the formation of aragonite (~0.10% Mg by weight).The rate at which magnesium is extracted from the water is determined by the stocking density of reef-building livestock, type of lighting, and other conditions; therefore, each aquarium will have different requirements for the rate of magnesium supplementation. Once the rate of magnesium uptake in the aquarium has been determined, the proper dosing rate of this product can be easily calculated. It is recommended that a quality salt mix with the proper (not augmented) alkalinity and concentrations of major, minor, and trace elements be used to establish natural seawater parameters in the reef aquarium, providing a stable ionic foundation on which to build.All Brightwell Aquatics liquid water care supplements are made with purified water and high purity materials. We develop formulae for aquaria based on empirical data, using observation and measurement rather than theory.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Complex system of non-pathogenic microbes and natural enzymes, specifically formulated to clean aquarium live rock and decorations. The concentration of dissolved and particulate organic materials in any aquatic environment can have a significant impact on the overall appearance of, as well as the health of organisms residing within, that system. Relatively low-nutrient environments are characterized by high water clarity, lack of unpleasant odors, and absence of unsightly coatings; this is collectively a result of the lack of nitrogen-, phosphorus-, and carbon-based waste available. Aquaria that are relatively rich in available nutrients have characteristics opposite to the afore mentioned, and are typically not desirable because of the resultant appearance of the system and the difficulty of maintaining healthy aquarium inhabitants. Brightwell Aquatics MicrōBacter CLEAN is a selective complex of extremely effective microbes and enzymes that not only reduce the concentrations of organic nitrogen, ammonia, nitrite, nitrate, phosphate, and organic carbon in all marine ecosystems, but make maintenance easy by actually loosening accumulations and coatings. Benefits Natural Cleaning action on all aquarium and decoration surfaces Loosening of ugly accumulations of unwanted substances and coatings, making removal by scraping and vacuuming much easier Establishment of bacterial colonies that multiply and continue to clean the aquarium Rapid reduction of organic carbon, ammonia, nitrite, nitrate, and phosphate Digestion of uneaten/undigested food, excreta, detritus, and other latent organic material, resulting in cleaner and healthier aquarium substrate (without having to physically clean or disturb the substrate) Instructions & Guidelines Shake product well before using. Mix appropriate volume of MicrōBacter CLEAN (see below) with 250-ml (~8 fl. oz.) of aquarium water in a clean container prior to addition to aquarium. If using a pipette to dispense MicrōBacter CLEAN below water level of container or aquarium, be sure to thoroughly clean pipette with fresh water prior to placing tube back into MicrōBacter CLEAN bottle; failure to do so will contaminate the product. Best results may be obtained by adding mixture to external biological filtration system. Works particularly well with Xport. Do not add to pump intake port(s). Turn protein skimming and UV-sterilization off for a period of 4 hours following addition to aquaria. While utilizing MicrōBacter CLEAN continue good maintenance practices such as regular vacuuming, using purified water for additions, and limiting the addition of unnecessary nutrients. For normal cleaning and to maintain a clean aquarium: Add 20 ml (4 capfuls) per 25 US-gallons (94.6 L) [≈16 drops per gallon (3.8 L)] of aquarium water weekly. For problem aquariums or to rapidly accelerate cleaning: Add 30 ml (6 capfuls) per 25 US-gallons (94.6 L) [≈24 drops per gallon (3.8 L)] of aquarium water on the first day, then add Add 5 ml (1 capful) per 25 US-gallons (94.6 L) [≈4 drops per gallon (3.8 L)] of aquarium water daily for 2 weeks or longer as necessary until desired results are achieved. Bacteria work slowly, so full results can take up to 8 to 10 weeks for long neglected sysytems. Caution Keep out of reach of children. Not for human consumption. Ingredients Purified water, proprietary blend of natural enzymes and non-pathogenic, beneficial microorganisms. MicrōBacter CLEAN does not require refrigeration, however storage in a cool, shaded area will prolong the activity, and maximize the shelf-life of the product. Keep away from heat!  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Description Standard Strength Coral & Frag Dip Cleaner Conditioner Acclimator Overview Koral MDT Coral Dip does not contain iodine. It is a prophylactic cleaner, dip and conditioner for use in cleaning new corals, live rock, and empty coral fragging & holding facilities. It will assist in cleaning corals prior to addition into the aquarium. It will also prevent the transfer of unwanted substances into the aquarium. It will assist in acclimating newly fragmented corals and washing new or damaged corals. It is safe for dipping stony and soft corals, sea anemones, mushroom anemones and zoanthids. It is excellent to use to wipe down or to soak holding facilities or old aquariums for re-use (rinse well after use). This product is not a medication or a household cleaner. Sizes 500ml Instructions & Guidelines Shake the bottle very well prior to every use. Wear rubber gloves & goggles when handling! Do not overdose! Add 20 ml (4 capfuls) of Koral MD Coral Dip to 1/2 gallon (1.9 liters) of aged seawater (preferably old aquarium water) in a plastic container. Mix well. Place the coral in the mixture. Make sure the entire coral is immersed. Bathe the coral in this dip for 5 to 10 minutes (15 minutes is the absolute maximum). While the coral is in the mixture, gently agitate the mixture.A turkey baster or similar device should be used to squirt the dip between the limbs of branching corals or in areas that might be inaccessible for thorough cleaning. Rinse the coral completely with plain aged seawater and place in the new aquarium home. Important: Although solution may be used to clean or dip several corals, it should be discarded after an hour. Never add Koral MD Coral Dip directly to any aquarium, for use as a dip outside the aquarium or a wipe or soak for cleaning empty coral holding facilities only! (rinse well after use!)  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Re-Mineralizes Reverse Osmosis, Deionized or Distilled Water for use in Freshwater & Planted Tanks Establishes an optimal mineral balance in water that has been purified or is exceedingly soft Provides a beneficial ratio of potassium, calcium, magnesium, and sodium, and other elements Beneficial to the overall health and osmoregulation of fishes, invertebrates, andmany aquatic plants Great for recreating environments suitable for breeding Replenishes minerals in systems that rarely receive water changes or after a large water change Fish, aquatic plants, and invertebrates need specific elements in the water to stay healthy and survive. Remineralīz is designed based on the latest aquatic research to provide these essential elements. Calcium is important for blood clotting, bone formation, and various processes in fish, while plants need it for cell structure and enzymes. Fish rely on potassium and sodium for proper nerve and muscle function, and plants use potassium for protein synthesis and enzyme activity. Magnesium is needed for chlorophyll production, and sulfur is essential for proteins and growth. Silicon, in the form of silica, strengthens plant cells and helps with root growth and pH balance. It's important to note that total dissolved solids (TDS) and general hardness (GH) measure different things and can't be directly converted. Remineralīz is designed to adjust water chemistry in tanks housing fishes and plants indigenous to nearly every aquatic habitat.* *For fishes indigenous to the East African Rift Lakes, Brightwell Rift Lake Chemie is preferred. Instructions & Guidelines Consult a reference book listing the water chemistry requirements of the fishes and/or plants being maintained to determine the optimal range of GH and/or TDS. Remember to adjust pH and temperature of the water prior to adding it into an aquarium housing live organisms. Determine GH and/or TDS in the aquarium prior to treating purified water with Remineralīz, then follow directions below accordingly. Shake bottle well before each use. To increase GH/TDS in a pre-established aquarium: Dose up to 5 ml Remineralīz per 20 US-gallons per hour until desired GH/TDS value is attained. Changes to water chemistry, regardless of the parameter being adjusted, should always be done gradually rather than rapidly. When preparing water for a water change: For every 10 US-gallons of water to be changed, add 5 ml (~1 capful) Remineralīz to purified water or tap water and mix thoroughly. Assuming a starting GH and TDS of 0, this will result in an increase of ~3.0 dGH and ~86 ppm, respectively. When employed at this dosing rate, 500 ml treats 1,000 US-gallons (3,785 L). When preparing water for a new aquarium set up: Always adjust the water chemistry prior to adding live organisms to the aquarium. If setting up a planted aquarium and placing the plants into the substrate prior to completely filling the aquarium, adjust the GH, KH, pH, and temperature of the water in a separate vessel (e.g. in a large, clean pail or vat) before adding it to the aquarium. Do not add a large volume of purified water to the aquarium and then attempt to adjust the water chemistry afterwards, as this will be stressful to the inhabitants. Use the Advanced Instructions to calculate the amount of Remineralīz that will be required to bring about the desired change in GH/TDS to the volume of water to be used. Advanced Instructions: Each ml of Remineralīz will increase the GH and TDS in 1 US-gallon of water by 6 dGH and 173 ppm, respectively. To obtain a specific GH and/or TDS value, divide the desired change in GH by 6 (or if TDS is preferred, divide the desired change in TDS by 173), then multiply this number by the net volume of water (in gallons) in the aquarium. Example: if the GH in 20 US-gallons is to be increased by 4 dGH, then add 16 ml Remineralīz (4 ÷ 6 = 0.8 ml per gallon; 0.8 ml per gallon x 20 gallons = 16 ml). Caution: May cause eye or skin irritation. If in eyes, flush with water for 15 minutes, get medical attention. If on skin, wash thoroughly with water. Keep out of reach of children. Ingredients: Balanced monovalent and multivalent cation mixture with appropriate anions and trace minerals, along with buffering compounds to replicate natural waters.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

You'll receive one Scoly

Read more less

Introducing the Majestic Purple Short Spine Pincushion Urchin: A Jewel of the Ocean Floor! Dive into a world of underwater wonder with the Purple Short Spine Pincushion Urchin. Renowned for its enchanting beauty and gentle presence, this captivating marine creature promises to elevate the elegance and allure of your saltwater aquarium or marine display. Exquisite Coloration: Adorned in regal shades of purple, the Purple Short Spine Pincushion Urchin exudes an aura of mystique and sophistication. Its striking coloration adds a touch of royalty to any aquatic setting, creating a mesmerizing focal point that captures the imagination of all who behold it. Efficient Algae Management: Harnessing the natural power of the ocean, this magnificent urchin serves as a diligent guardian against unsightly algae growth. With its voracious appetite for algae, it tirelessly patrols the aquarium, keeping rocks, glass, and substrate pristine and algae-free, ensuring optimal water quality and a thriving aquatic environment. Gentle Ecosystem Steward: Embrace the harmony of nature with the Purple Short Spine Pincushion Urchin as your aquatic ally. As a peaceful and unassuming creature, it coexists harmoniously with a variety of marine inhabitants, contributing to the balance and vitality of your underwater ecosystem with its gentle presence. Easy to Maintain: Experience the joys of marine aquarium ownership without the hassle. The Purple Short Spine Pincushion Urchin is remarkably easy to care for, requiring minimal maintenance and thriving in well-maintained saltwater aquariums with stable water parameters. Sit back, relax, and let this captivating urchin enrich your aquatic world effortlessly. Limited Availability: Unlock the splendor of the ocean with the Purple Short Spine Pincushion Urchin, available in limited quantities. Don't miss your chance to add this exquisite jewel of the sea to your underwater realm and elevate your marine experience to new heights! *Discounts Cannot be applied to inverts*  *Inverts will ship with your next day order*

Read more less

Introducing Blue Leg Hermit Crabs: The Dynamic Clean-Up Crew for Your Aquarium! Enhance the health and vibrancy of your tank with Blue Leg Hermit Crabs. Known for their industrious nature and striking appearance, these charismatic crustaceans are prized additions to any marine or reef aquarium, offering both practical benefits and visual appeal. Efficient Algae Control: Blue Leg Hermit Crabs are voracious algae eaters, with a keen appetite for unsightly algae growth on rocks, glass, and substrate. They methodically scour surfaces, grazing on algae and detritus, helping to maintain optimal water quality and a balanced ecosystem in your tank. Natural Detritus Cleaners: In addition to algae control, Blue Leg Hermit Crabs are natural detritus cleaners, tirelessly scavenging for organic matter and debris in your aquarium. They help prevent the buildup of waste and excess nutrients, promoting a cleaner and healthier environment for your aquatic inhabitants. Colorful and Active: With their vibrant blue legs and active movements, Blue Leg Hermit Crabs add a burst of color and energy to your tank. Watch as they scuttle across the substrate and rockwork, performing their important cleaning duties while entertaining observers with their lively antics. Peaceful Tankmates: These peaceful crabs are compatible with a wide range of tankmates, including small fish, shrimp, and other invertebrates. Whether you have a community tank or a specialized reef setup, Blue Leg Hermit Crabs coexist harmoniously with other inhabitants, making them an ideal addition to any aquarium. Easy to Care for: Blue Leg Hermit Crabs are relatively low-maintenance, making them suitable for both beginner and experienced aquarists. They thrive in well-established reef tanks with stable water parameters and ample hiding places, where they can forage and explore to their heart's content. Sustainable and Eco-Friendly: Blue Leg Hermit Crabs are sustainably sourced and environmentally friendly, making them a responsible choice for conscientious aquarists. By adding these beneficial crustaceans to your tank, you're not only enhancing its beauty but also contributing to the ecological balance of your aquarium ecosystem. Transform your aquarium into a cleaner, healthier, and more dynamic underwater world with Blue Leg Hermit Crabs. Experience the benefits of natural algae control and detritus cleanup, combined with the vibrant colors and lively movements of these delightful crustaceans. Dive into a world of cleaner waters and vibrant marine life with Blue Leg Hermit Crabs today! *Discounts Cannot be applied to inverts* *Inverts will ship with your next day order*

Read more less

The perfect 1-gallon jug for mixing and storing 2-part or any other liquid solutions. There are many different methods for extracting the liquid out of the jugs from manual pump-top dispensers to drilling a hole in the cap and feeding your tubings through the hole down to the bottom of the jug.  Each jug is safe for standard salts used in 2-part or most other additives used in or around saltwater aquariums.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Ultra Pure Magnesium Additive for 2-Part Maintenance in your Reef Tank! Maintaining proper magnesium levels helps achieve the essential balance of calcium and alkalinity in your tank by preventing excess calcium carbonate precipitation. Not all magnesium additives are created equal and the largest factor comes into the sulfate to chloride ratio in the magnesium solution. For large adjustments, you will want to use a magnesium solution that has limited amounts of sulfate to keep your reef balanced, where for daily 2-part dosing or maintenance, a larger amount of sulfate is required to keep your reef balanced. Pre-Mixed - Makes 1 Gallon of BRS Liquid Magnesium Mix: 5 1/4 c. Magnesium Chloride : 2 c. Magnesium Sulfate Ideal for weekly/monthly dosing or small adjustments No residue left behind Mixes fast and clear Designed for easy dosing Pharmaceutical grade materials used Mixing Instructions - BRS Liquid Magnesium Mix 2-Part Dosing or Small Adjustments - Fill a 1-gallon container 1/2 full of RO/DI or distilled water and then add the entire contents of the package into the container. Secure the cap on the container and shake it for about 10 seconds to help start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI or distilled water. Give the container a few more shakes and then let it sit until all the salts have fully dissolved before use. Dosing Instructions Knowing how much to dose is made simple using the BRS Reef Calculator! Create a 1-gallon solution by following the Mixing Instructions above and then test your aquariums current magnesium level and using the BRS Reef Calculator input your current and desired magnesium levels along with your total system water volume. Choose BRS Liquid Magnesium Mix (New Pharma Pouch) option from the drop-down menu and select calculate. The result will be how much magnesium solution you will need to add to raise your aquariums water volume to the desired level. We suggest adding small amounts at a time into a high flow area of the tank, like a power heads output or a sump baffle. It is important to keep changes limited to under 100ppm or less per day to not shock your corals. Magnesium Instructions What is 2-Part Dosing? As corals grow they consume calcium and alkalinity but to keep the levels steady in a reef tank requires the use of magnesium too, so it is more like 3-part dosing, to be honest. Reefers will use calcium chloride and soda ash (sodium carbonate) to maintain their reef tanks chemistry daily and add a magnesium supplement every couple weeks. Magnesium supplements are usually a blend of magnesium chloride and magnesium sulfate to help keep the sulfate to chloride ratio balanced in the aquarium. When starting a 2 part dosing system it is important to use a good test kit to establish a baseline. We really like using the Red Sea Reef Foundation test kit or Hanna Colorimeters for their accuracy and repeatability which leads to a much more stable reef and overall coral health. Stability is one of the keys to keeping a saltwater tank healthy over a long span of time and most reefers will set up an automated system that doses their aquariums needed additives daily removing repetitive (and forgettable) chore. There are purpose-built dosing systems like the Kamor X4, Neptune DOS, or Bubble Magus T-11 that are super easy to program and keeps everything in a compact package, but there are other options that many reefers prefer like the BRS 1.1mL dosing pumps that can be paired with a digital timer for precise and affordable dosing control.   Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Bulk Magnesium Sulfate - Ultra Pure Magnesium Additive for your Reef Tank! Keep your reef balanced - Use with BRS Pharma Magnesium Chloride Maintaining proper magnesium levels helps achieve the essential balance of calcium and alkalinity in your tank by preventing excess calcium carbonate precipitation. BRS Bulk Magnesium Sulfate is a fine powder and dissolves crystal clear. Unlike traditional Magnesium Sulfate, there are no excess water molecules allowing it to dissolve faster, along with its ability to be mixed with magnesium chloride without leaving any residues or undissolved salts behind.  Buy in bulk and SAVE MONEY! - Resealable Packaging No residue left behind Mixes fast and clear Designed for easy dosing Pharmaceutical grade materials Mixing Instructions - BRS Magnesium Mix Solution General Adjustments - Fill a 1-gallon container 1/2 full of RO/DI or distilled water and then add 7-1/4 cups (1,285 grams) of BRS Magnesium Chloride and 1/2 cup (124 grams) of BRS Magnesium Sulfate into the container. Secure the cap on the container and shake it for about 10 seconds to help start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI or distilled water. Give the container a few more shakes and then let it sit until all the salts have fully dissolved before use. 2-Part Dosing - Fill a 1-gallon container 1/2 full of RO/DI or distilled water and then add 5-1/4 cups (933 grams) of BRS Magnesium Chloride and 2 cups (332 grams) of BRS Magnesium Sulfate into the container. Secure the cap on the container and shake it for about 10 seconds to help start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI or distilled water. Give the container a few more shakes and then let it sit until all the salts have fully dissolved before use. Dosing Instructions Knowing how much to dose is made simple using the BRS Reef Calculator! Create a 1-gallon solution by following the Mixing Instructions above and then test your aquariums current magnesium level and using the BRS Reef Calculator input your current and desired magnesium levels along with your total system water volume. Choose BRS Liquid Magnesium Mix (New Pharma Pouch) option from the drop-down menu and select calculate. The result will be how much magnesium solution you will need to add to raise your aquariums water volume to the desired level. We suggest adding small amounts at a time into a high flow area of the tank, like a power heads output or a sump baffle. It is important to keep changes limited to under 100ppm or less per day to not shock your corals. Magnesium Instructions What is 2-Part Dosing? As corals grow they consume calcium and alkalinity but to keep the levels steady in a reef tank requires the use of magnesium too, so it is more like 3-part dosing, to be honest. Reefers will use calcium chloride and soda ash (sodium carbonate) to maintain their reef tanks chemistry daily and add a magnesium supplement every couple weeks. Magnesium supplements are usually a blend of magnesium chloride and magnesium sulfate to help keep the sulfate to chloride ratio balanced in the aquarium. When starting a 2 part dosing system it is important to use a good test kit to establish a baseline. We really like using the Red Sea Reef Foundation test kit or Hanna Colorimeters for their accuracy and repeatability which leads to a much more stable reef and overall coral health. Stability is one of the keys to keeping a saltwater tank healthy over a long span of time and most reefers will set up an automated system that doses their aquariums needed additives daily removing repetitive (and forgettable) chore. There are purpose-built dosing systems like the Kamor X4, Neptune DOS, or Bubble Magus T-11 that are super easy to program and keeps everything in a compact package, but there are other options that many reefers prefer like the BRS 1.1mL dosing pumps that can be paired with a digital timer for precise and affordable dosing control.   Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Ultra-pure Calcium Chloride for 2-part dosing in your reef tank! Bulk Reef Supply 2-part additives are the perfect solution to replenish the intake of calcium and alkalinity coral consumes when it grows. Using only pharmaceutical based ingredients allows you to keep a cleaner reef with fewer impurities, leading to faster growth and more brilliant coloration of your coral. All BRS additives mix crystal clear and do not leave any nasty residues or brown impurities behind like other calcium and alkalinity additives.  Also Available In 5 Gallon Mix (5 single-use pouches) 10 Gallon Mix (10 single-use pouches) Each pouch is professionally weighed to make 1 gallon of calcium chloride solution that can be used to accompany any dosing method or used with other Bulk Reef Supply additives for an easy to follow system of dosing. The BRS system uses a balanced 1:1 calcium to alkalinity ratio that keeps dosing simple and doesn't require you to be a math wizard. In most cases, the amount of BRS 2 Part Calcium solution you need to dose will match the amount of BRS Alkalinity solution required.  Mixing Instructions - BRS Calcium Liquid Solution Fill a 1-gallon container 4/5 full of RO/DI or distilled water and then add the entire contents of 1 pouch into the container. Secure the cap on the container and shake it for about 10 seconds to help start the dissolving process. Remove the cap and fill the container the rest of the way with RO/DI or distilled water. Give the container a few more shakes and then let it sit until all the salts have dissolved before use.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Ultra-pure Grade Soda Ash for 2-part dosing in your reef tank! Bulk Reef Supply 2-part additives are the perfect solution to replenish the intake of calcium and alkalinity coral consumes when it grows. Using only pharmaceutical grade ingredients allows you to keep a cleaner reef with fewer impurities, leading to faster growth and more brilliant coloration of your coral. All BRS additives mix crystal clear and do not leave any nasty residues or brown impurities behind like other calcium and alkalinity additives.  Also Available In 5 Gallon Mix (5 single-use pouches) 10 Gallon Mix (10 single-use pouches) Each pouch is professionally weighed to make 1 gallon of Grade Soda Ash solution that can be used to accompany any dosing method or used with other Bulk Reef Supply additives for an easy to follow system of dosing. The BRS system uses a balanced 1:1 calcium to alkalinity ratio that keeps dosing simple and doesn't require you to be a math wizard. In most cases, the amount of BRS Alkalinity solution you need to dose will match the amount of BRS 2 Part Calcium solution required.   Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Red Sea Trace Colors A contains an Iodine and Halogen complex to help promote the pink colors in corals. 1 mL will raise the iodine level of 25 gallons (100 liters) by 0.03 ppm. Through extensive research, Red Sea has identified 31 trace and minor elements that help make up the skeleton and soft tissue of corals. These elements are essential to the proper coloration of SPS corals. Red Sea has divided these elements into four groups which make up there Red Sea Trace Colors. Red Sea Trace Colors A (Iodine/Halogens) - promotes pink colors Red Sea Trace Colors B (Potassium) - promotes red colors Red Sea Trace Colors C (Iron/Complementary Trace Elements) - promotes green colors Red Sea Trace Colors D (Trace Element Complex) - promotes purple/blue colors  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Red Sea Trace Colors B contains potassium to help promote the red colors in corals. 1 mL will raise the potassium level of 25 gallons (100 liters) by 1.75ppm. Through extensive research, Red Sea has identified 31 trace and minor elements that help make up the skeleton and soft tissue of corals. These elements are essential to the proper coloration of SPS corals. Red Sea has divided these elements into four groups which make up there Red Sea Trace Colors. Red Sea Trace Colors A (Iodine/Halogens) - promotes pink colors Red Sea Trace Colors B (Potassium) - promotes red colors Red Sea Trace Colors C (Iron/Complementary Trace Elements) - promotes green colors Red Sea Trace Colors D (Trace Element Complex) - promotes purple/blue colors  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Red Sea Trace Colors C contains iron and complementary trace element complex to help promote the green colors in corals. 1 mL will raise the Iron level of 25 gallons (100 liters) by 0.02ppm. Through extensive research, Red Sea has identified 31 trace and minor elements that help make up the skeleton and soft tissue of corals. These elements are essential to the proper coloration of SPS corals. Red Sea has divided these elements into four groups which make up there Red Sea Trace Colors. Red Sea Trace Colors A (Iodine/Halogens) - promotes pink colors Red Sea Trace Colors B (Potassium) - promotes red colors Red Sea Trace Colors C (Iron/Complementary Trace Elements) - promotes green colors Red Sea Trace Colors D (Trace Element Complex) - promotes purple/blue colors  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Red Sea Trace Colors D contains trace element complex to help promote the purple/blue colors in corals. Through extensive research, Red Sea has identified 31 trace and minor elements that help make up the skeleton and soft tissue of corals. These elements are essential to the proper coloration of SPS corals. Red Sea has divided these elements into four groups which make up there Red Sea Trace Colors. Red Sea Trace Colors A (Iodine/Halogens) - promotes pink colors Red Sea Trace Colors B (Potassium) - promotes red colors Red Sea Trace Colors C (Iron/Complementary Trace Elements) - promotes green colors Red Sea Trace Colors D (Trace Element Complex) - promotes purple/blue colors   Notes for use Pour DipX into an empty container. Verify the container is both clean and dry beforehand. Use 10 ml of DipX (diluted 1:100 with aquarium water) to prepare 1L/0.26gallons of bath mix. Place your new coral or live rock in the container for no more than 15 minutes. Bath solution can be reused for up to four batches of corals/rocks but should be discarded within 2 hours from preparation.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

DipX Safe Introduction of New Corals DipX is a highly effective dip for safely introducing new corals and live rocks to your aquarium.   A simple 15-minute bath in DipX before placing a new coral in the aquarium will drive away unwanted “hitchhikers”, thereby maintaining the safety of your reef.   New corals often come with unwanted “hitchhikers” hidden deep inside the corals’ crevices. These various tiny creatures are usually invisible to the naked eye, and once in the aquarium, they can migrate to other corals and damage your delicate reef eco-system.   Over the years, reef hobbyists have used generic baths solutions such as fresh water, Iodine, and even household disinfectants, all of which repel some of the hitchhikers, but not all of them.   For the past few years, we have been cultivating tanks with infested corals and comparing a wide range of commercially available dips and other repelling ingredients, examining both their effectiveness and their overall safety for the corals.    The result is DipX – a unique blend of essential oils, without inorganic disinfectants. Our tests have shown that DipX is completely safe for all kinds of corals and more effective than any other solution we tested.    Corals that were bathed in DipX still repelled unwanted “hitchhikers”, even though they were previously dipped in other solutions  On the other hand, corals that were dipped in other solutions after they were bathed in DipX did not repel anything.   Features Safe for all kinds of corals: SPS, LPS and Soft corals, Zoanthids, mushroom anemones (Discosoma and Ricordea) and live rocks. Effectively drives away Acropora eating flatworm, Montipora eating nudibranch, Acropora Red Bug and other coral “hitchhikers”. Slows down RTN and STN (external bath only). Free of inorganic elements such as potassium iodide or bromide. Easy to use, reliable and cost-effective   Notes for use Pour DipX into an empty container. Verify the container is both clean and dry beforehand. Use 10 ml of DipX (diluted 1:100 with aquarium water) to prepare 1L/0.26gallons of bath mix. Place your new coral or live rock in the container for no more than 15 minutes. Bath solution can be reused for up to four batches of corals/rocks but should be discarded within 2 hours from preparation.  Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Ultra-pure Grade Soda Ash for 2-part dosing in your reef tank! Bulk Reef Supply 2-part additives are the perfect solution to replenish the intake of calcium and alkalinity coral consumes when it grows. Using only pharmaceutical grade ingredients allows you to keep a cleaner reef with fewer impurities, leading to faster growth and more brilliant coloration of your coral. All BRS additives mix crystal clear and do not leave any nasty residues or brown impurities behind like other calcium and alkalinity additives.   Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

Introducing the Splendid Yellow Sea Cucumber: A Marvel of Underwater Elegance! Enrich your marine habitat with the vibrant charm of the Yellow Sea Cucumber. With its striking yellow hue and graceful form, this captivating creature serves as both a stunning centerpiece and a valuable contributor to the health of your aquarium ecosystem. Radiant Yellow Beauty: Dazzle your senses with the radiant brilliance of the Yellow Sea Cucumber. Its vibrant yellow coloration adds a burst of sunshine to your underwater world, creating a visually captivating display that brightens any aquatic environment. Natural Detritus Processor: Experience the efficiency of nature's cleanup crew with the Yellow Sea Cucumber. As a proficient detritivore, it diligently scavenges the substrate, consuming organic waste and leftover food particles. By doing so, it helps maintain pristine water conditions and reduces the risk of harmful nutrient buildup in your tank. Peaceful Coexistence: Embrace the tranquility of the Yellow Sea Cucumber as it gracefully moves through your aquarium. Known for its peaceful nature, this gentle creature harmonizes effortlessly with a variety of tankmates, making it an ideal addition to both community and reef setups. Easy Care and Maintenance: Enjoy hassle-free aquarium ownership with the Yellow Sea Cucumber. This low-maintenance species thrives in well-established marine tanks with stable water parameters. Simply provide ample hiding places and a nutritious substrate, and watch as it flourishes in its new aquatic home. Eco-Friendly Aquatic Ambassador: Support sustainable aquaculture practices by welcoming the Yellow Sea Cucumber into your aquarium. Sourced from responsible suppliers, this species is an eco-conscious choice for conscientious hobbyists who prioritize the health and well-being of marine ecosystems. Limited Availability: Don't miss the opportunity to add a touch of underwater elegance to your aquatic landscape. The Yellow Sea Cucumber is available in limited quantities, making each specimen a rare and cherished addition to your marine collection. Transform your aquarium into a haven of beauty and balance with the enchanting Yellow Sea Cucumber. Order now and experience the splendor of this remarkable marine marvel firsthand! *Discounts Cannot be applied to inverts*  *Inverts will ship with your next day order*

Read more less

Ultra-pure Calcium Chloride for 2-part dosing in your reef tank! Bulk Reef Supply 2-part additives are the perfect solution to replenish the intake of calcium and alkalinity coral consumes when it grows. Using only pharmaceutical based ingredients allows you to keep a cleaner reef with fewer impurities, leading to faster growth and more brilliant coloration of your coral. All BRS additives mix crystal clear and do not leave any nasty residues or brown impurities behind like other calcium and alkalinity additives.     Localpick up ONLY!!!!! *Discount codes cannot be applied to this product  

Read more less

REEF-SPEC Carbon has all the proper technical and physical characteristics making it a perfect carbon for marine and reef aquariums. The carbon will absorb and rapidly remove organic pollutants through its micro/macro pore structures making your tanks water crystal clear and removing any possible smells associated.  Why Use Carbon? Carbon has been used in aquariums for decades with the purpose of trapping organic pollutants that can normally cause your water to tint yellow, along with a possible foul smell. Your livestock will constantly produce organic waste that when broken down can be a catalyst for unwanted microorganisms and also increasing the total oxygen demand of the system which can lead to many other issues.   Media Bag or Reactor? We normally suggest running carbon in an up flow style reactor since they provide consistent contact time, leading to greater control and overall efficiency. Filter or Media Bags work great for many applications but will not be nearly as efficient as its counter part. When using a media bag it is best to place them in an area of direct flow like a sump baffle or overflow chamber directing water to pass over and through the carbon. With media bags it is recommended to gently need the bag once a week or so allowing the carbon in the center of the bag to migrate to the outer edges.   Usage Guide Organic load and yellow tint removal: The recommended dosage of Red Sea’s REEF-SPEC Carbon is approximately 50 gr (100 ml) per 200 L (50 gallons) for a period of 1-2 months for a moderately stocked reef aquarium. Post-medication treatment: The recommended dosage of Red Sea’s REEF-SPEC Carbon to absorb medication residuals is approximately 100 gr (200 ml) per 200 L (50 gallons) for a period of a week. Ozone post-treatment: The recommended dosage of Red Sea’s REEF-SPEC Carbon to remove residual ozone is 50 gr per 50mg/hr of ozone injection. The carbon should be placed at the ozone reactor/ protein skimmer outlet. Carbon should be replaced once it has reached approximately 50% of its original volume.   Tips when using REEF-SPEC Carbon: Rinse any fines under tap water until it runs clear Recommended flow around 250 - 400 GPH per 50 gr of REEF-SPEC Carbon Replace every 1.5 - 2 months   REEF-SPEC Carbon Specifications Shape - 0.6 - 2.3 mm flake Density - 0.48 g/ml Pore Volume (PV) - 1.04 ml/g Total Surface Area (TSA) - 1000 m2/g TSA/PV - 990 m2/ml Small Organic Adsorption - 1000mg/g Large Organic Adsorption - 280 mg/g pH in Distilled Water - >8 Phosphate Output - 0.000001 g/ml Includes Filter Bag    Localpick up ONLY!!!!! *Discount codes cannot be applied to this product

Read more less

New Design Aqau SD Tshirt  

Read more less

New Design Aqau SD Tshirt  

Read more less

New Design Aqau SD Tshirt  

Read more less

You'll receive 1 (one) Walking Dendro

Read more less

We feed them daily with Reef Roids

Read more less

Elegance corals are ae moderately difficult LPS species and come in several different colors and patterns.  Elegance corals require moderate lighting, low to medium water flow and stable water parameters.  When placing Elegance Corals in a tank, give plenty of space around them as they can sting other corals.

Read more less

No duplicates - Colors and Patterns will vary - These Grades are Higher than other packs

Read more less

Elegance corals are ae moderately difficult LPS species and come in several different colors and patterns.  Elegance corals require moderate lighting, low to medium water flow and stable water parameters.  When placing Elegance Corals in a tank, give plenty of space around them as they can sting other corals.

Read more less

We will pick the nicer ones out of the batch for you!  

Read more less

Approx 2 - 3" when opened (color variations may vary slightly)

Read more less